Disc Mower Conditioner Type chops every type of grass herbs or different pasture plants with a high speed. The discs are very close to the ground, thus it raises the productivity. It crops the herbs in such a way that they can be dried and collected easily. It gets the move from the P.T.O. shaft and makes the chopping by the help of knives that are turning on the mower. The plant juice is collected from stem with the help of discs. The crop is harvested gently and neatly. The crop processed in the rotary disc is spread on the land bunchily as lines and groups. The drying of the top and bottom levels happen at the same amount of time with the help of air stream occurring because of these bunchy lines. The mowing unit is aligned with the tractor by rotating 90° vertically, so village alleys and bridge passes can be done easily. Helical plate rubber rollers are developed for mowing clover and crop with brittle stems. Rollers harmonize with each other perfectly and run without any vibration. Waxy layer is blown fully by means of the rollers. By this means, the drying time of leaf and stem are equalized.
The Rotary Drum Grass Mowing machines are connected to tractor via three-point hanging system and get its drive from the PTO at 540 rpm and transmit to the drums through belt pulley. It is a grass mowing machine with free oscillated blades which are on the two drums rotating in reverse to each other with this system to cut green feed plants (clover, grass plants, barley, oat, etc.) being opened by the effect of centrifugal force and leave on the surface of the field in barrel state. The Drum Grass Mowers which are manufactured ideal for all sorts of the farms are designed to use with the tractors having lower and medium horse powers. Leaving the product on the ground in a better barrel state by means of the lower drums be able to rotate idle without damaging especially the wet and bent products using even a very low powered tractor is one of its features. The Grass Mowing machine is protected against the damages which may incur due to some roughness on the field. Thanks to the shock absorbing spring system available in the machine, the machine recovers the shapes according to the field and prevents the damages which the machine may encounter. Thanks to the hydraulic system existed in the machine, mowing at any angle can be achieved.
Rotary Cultivator is a secondary tillage tool used in preparing seed-beds, stubble-ploughing in especially farms, vineyards and gardens. It is also a multi-purposed and long lasting environment-friendly machine that helps with the increase of the humus content of the soil by incorporating the plant residues and organic fertilizer into the soil and it does not make it a necessity to fight with the chemical weeds.
The fact that the motion coming from the power-take-off shaft is transferred to the blades through the gear system makes savings on power and fuel in proportion to the chain system. The milling cutter blades shreds, mixes and crumbles the soil by operating vertically on the surface of the soil. It provides the water-air balance of the soil by making it loose.
Rotary grass harvesters turn the grass and straw that are mowed in the field into a barrel (row) and make them ready for baler or self-collecting silage wagons. With its horizontally placed rakes, it prevents soil and stone from entering the barrel, ensuring that the bale or silage is healthier and has a higher nutritional value.
Seed Drill is hanged type combined seeding machine that can place the seed and fertilizer in requested amount, depth and in equal line. By en-stringed steel axe type discs seed and fertilizer can be placed in the same depth and germination rate is in maximum level. By special designed gearbox with 3 eccentric that works silently, seed discs can rotate in minimum speed and also the smaller seeds can be placed
smoothly. Besides, by this gearbox, it is possible to sow in requested kg. This machine is manufactured with 16-18-20-22 and 24 discs and the line space is 125 mm. If requested, it can be manufactured as hydraulic persistence system with or without fertilizer. By swallow type harrow string, putting out the soil and covering the soil can be done easily.
Sickle bar mower is a three-point linkage mower that attached to the lower links and to the upper link bracket of the tractor. The blade is moved by three V-belts which will slide if a solid obstruction enters to the cutter bar causing the clogging of the blade. The crank shaft and blade are dynamically balanced, thus ensuring a smooth and quiet running of the machine.
The movement device permits the cutter bar to operate at wide slope angle. The cutter bar is equipped with an automatic brake system which enables to rebound in case of coming across with an obstruction. Attaching of the machine to the tractor can be easily done by driving the tractor to the back.
The subsoiler is a tool for working the soil which ensures the breaking, loosening and drainage of the base stone. Thanks to the hole on the feet, the soil is worked at 5 different depths. The subsoiler combines a rotary harrow with a hydraulic piston in the transport position to facilitate movement.
PTO Tractor Powered auger conveyor is used for grains (wheat, barley, corn etc.) We have two options with these conveyors. Options depend on capacity, maximum conveying high levels. First option on capacity we have 2 products. The diameter of pipe is starting 168mm-192mm. Second option on maximum conveying high level we have products as well. The conveyor length is starting 8-10 meters. Conveyor height can be adjustable by manually steel rope system.
The heavy moldboard plow is made from a blade frame with optional 2-3-4-5-6 holes in widths of 11-12-13-14-16 inches. Our plows are made of quality materials and have a long service life. The suspension system of the truck complies with international standarts and can be connected to any type of tractor. Thanks to the special spring relief mechanisms placed on each body, the plow cannot be damaged by getting rid of all kinds of obstacles on stony ground. The machine is economical in terms of time and fuel.
Heavy type Wide Offset Disc Harrows are trailed type on two wheel. It can be easily transported to field. Trailed type wide offset disc harrow
moved by hydraulic system for transport and deepth adjustment. Light type Wide Trailed off set disc harrow with hydraulic lifting system is used for breaking clods and mixing soils to make seed bed. Also it can be used for chopping of weeds and stems, breaking of plant stubbles (such as sunflower, maize, cotton, wheat and etc.) mixing with soil after harvesting and it help to obtaine a kind of organic fertilizer.
This kind of disc harrow can work very easily in wet soils and according to the soil conditions it can be used instead of plough. Battery angle can be arranged till 20-22 degree. Tires moved standard level and easily adjusted the working depth by means of the axle mechanism on the tire. It provides the wheel to move on field level by the axle mechanism on the wheel and thereby working depth may be adjusted efficiently.
It has been used house bearings with conical bearings one side and ball bearing other side with high quality seals. It can be greaseable.
It is connected to the tractor by the drawbar. The pressure required for spraying is provided by hydraulic membrane pumps. The pump takes its movement from the tractor PTO. Comet brand pumps are used as standard. A fiberglass (reinforced) or polyethylene tank is used as a spraying tank. The turbo fan on the machine provides compressed air to its surroundings with its propeller, which takes its movement from the tractor’s spindle.
It is an easily adjustable and useful machine. It is a machine with high work efficiency. Our warehouses are produced from polyester against the negative effects of pesticides. The water filter can be cleaned easily. The hydraulic mixing system mixes the drug with water homogeneously.
