Machine is connected to the tractor’s three-point hitch, which is driven by its own wheel,The movement which is obtained from the wheel transmission is sent to the mechanism is transmitted from the moving belt bucket-wheel transmission mechanism. Potato tubes pass through the buckets on the band get the potatoes on them. Tubes with buckets only keep vibration mechanism is provided. Digging tubes with a scratch-standard distances left leg started. The scratch wings closed by the closure over the tubers. A marker assembly takes place on the machine which works by means of a hydraulic piston assembly on the machine.
Potato planter is connected to the tractor’s three-point hitch, which is driven by its own wheel,. The movement which is obtained from the
wheel transmission is sent to the mechanism is transmitted from the moving belt bucket-wheel transmission mechanism. Potato tubes pass through the buckets on the band get the potatoes on them. Tubes with buckets only keep vibration mechanism is provided. Digging tubes with a scratch-standard distances left leg started. The scratch wings closed by the closure over the tubers. A marker assembly takes place on the machine which works by means of a hydraulic piston assembly on the machine.
Power Harrow transfers the motion received from tractor power take-off as vertical to the motion way with the help of parallel gears to the soil
surface. It consists of rotating blades. It is easy to operate soil processing and seed bed preparation equipment. It can process the soil vertically. Therefore, it does not form and basis underground and protects the soil humidity since it doesn’t turn the soil upside-down. It mixes the plants and stalks which are left from harvesting, to the soil and forms them as organic fertilizer. It prepares a very proper and ideal seed bed with the help of gear roller behind the machine and increases the product efficiency. Also, a combination can be made with pneumatic and grain seeders and both soil processing and sowing can be performed simultaneously. This provides time and oil savings.
Profile Chassis Disc plough is mounted to tractor’s hydraulic lifting unit and universal three point linkage system. With this plough you don’t need to change the lids according to the kind of ground like in the lidded ploughs. Instead of this you can easily regulate the way and situation of the discs in the disc ploughs. There is less chance to choke in disc ploughs with seed or manure. In rocked area discs are wearied less then lidded ploughs. lidded ploughs are entering to the ground like dagger because of this there can be rolling over the stones. In disc ploughs if you penetrate in an improper time there is no muddy position in high moisture. But in the lidded plough you need less drawing power like %25 -30 then lidded plough. Chassis is made of 120 x 120 x 8 mm square profile and you can increase the number of the discs.
Our product is designed to plow the subsoil to a depth of 8-14 inches and 15-20 inches laterally. The plow can easily work in rocky and stony areas covered with plant roots. The plow cannot be damaged when any kind of obstavle is easily removed in the field. Compliant with international standarts, the mounting system for our plows can be attached to any brand of tractor. The plow can be made from 2 to 6 moldboards. The upper part of the plow is made of a special material, the automation and the surfaces in contact with the ground are reinforced with a reinforcing system. The plow does not accumulate dirt and can be cleaned easily by scraping.
Disc Mower Conditioner Type chops every type of grass herbs or different pasture plants with a high speed. The discs are very close to the ground, thus it raises the productivity. It crops the herbs in such a way that they can be dried and collected easily. It gets the move from the P.T.O. shaft and makes the chopping by the help of knives that are turning on the mower. The plant juice is collected from stem with the help of discs. The crop is harvested gently and neatly. The crop processed in the rotary disc is spread on the land bunchily as lines and groups. The drying of the top and bottom levels happen at the same amount of time with the help of air stream occurring because of these bunchy lines. The mowing unit is aligned with the tractor by rotating 90° vertically, so village alleys and bridge passes can be done easily. Helical plate rubber rollers are developed for mowing clover and crop with brittle stems. Rollers harmonize with each other perfectly and run without any vibration. Waxy layer is blown fully by means of the rollers. By this means, the drying time of leaf and stem are equalized.
The Rotary Drum Grass Mowing machines are connected to tractor via three-point hanging system and get its drive from the PTO at 540 rpm and transmit to the drums through belt pulley. It is a grass mowing machine with free oscillated blades which are on the two drums rotating in reverse to each other with this system to cut green feed plants (clover, grass plants, barley, oat, etc.) being opened by the effect of centrifugal force and leave on the surface of the field in barrel state. The Drum Grass Mowers which are manufactured ideal for all sorts of the farms are designed to use with the tractors having lower and medium horse powers. Leaving the product on the ground in a better barrel state by means of the lower drums be able to rotate idle without damaging especially the wet and bent products using even a very low powered tractor is one of its features. The Grass Mowing machine is protected against the damages which may incur due to some roughness on the field. Thanks to the shock absorbing spring system available in the machine, the machine recovers the shapes according to the field and prevents the damages which the machine may encounter. Thanks to the hydraulic system existed in the machine, mowing at any angle can be achieved.
Rotary Cultivator is a secondary tillage tool used in preparing seed-beds, stubble-ploughing in especially farms, vineyards and gardens. It is also a multi-purposed and long lasting environment-friendly machine that helps with the increase of the humus content of the soil by incorporating the plant residues and organic fertilizer into the soil and it does not make it a necessity to fight with the chemical weeds.
The fact that the motion coming from the power-take-off shaft is transferred to the blades through the gear system makes savings on power and fuel in proportion to the chain system. The milling cutter blades shreds, mixes and crumbles the soil by operating vertically on the surface of the soil. It provides the water-air balance of the soil by making it loose.
Rotary grass harvesters turn the grass and straw that are mowed in the field into a barrel (row) and make them ready for baler or self-collecting silage wagons. With its horizontally placed rakes, it prevents soil and stone from entering the barrel, ensuring that the bale or silage is healthier and has a higher nutritional value.
The centrifugal fertilizer spreader is connected to the tractor with the tractor three-point hitch system. The machine works from the tractor PTO shaft by means of the shaft. It is possible to fertilize optionally by means of the adjustment lever. Equal amount of fertilization is provided on both sides thanks to specially designed outlet openings. There are five types of warehouse capacity, 250-350-300-400-500 lt.
Seed Drill is hanged type combined seeding machine that can place the seed and fertilizer in requested amount, depth and in equal line. By en-stringed steel axe type discs seed and fertilizer can be placed in the same depth and germination rate is in maximum level. By special designed gearbox with 3 eccentric that works silently, seed discs can rotate in minimum speed and also the smaller seeds can be placed
smoothly. Besides, by this gearbox, it is possible to sow in requested kg. This machine is manufactured with 16-18-20-22 and 24 discs and the line space is 125 mm. If requested, it can be manufactured as hydraulic persistence system with or without fertilizer. By swallow type harrow string, putting out the soil and covering the soil can be done easily.
Sickle bar mower is a three-point linkage mower that attached to the lower links and to the upper link bracket of the tractor. The blade is moved by three V-belts which will slide if a solid obstruction enters to the cutter bar causing the clogging of the blade. The crank shaft and blade are dynamically balanced, thus ensuring a smooth and quiet running of the machine.
The movement device permits the cutter bar to operate at wide slope angle. The cutter bar is equipped with an automatic brake system which enables to rebound in case of coming across with an obstruction. Attaching of the machine to the tractor can be easily done by driving the tractor to the back.
